• PID controller with auto-tuning to ensure rapid heating and minimum temperature fluctuation and overshoot.
• Push-button operation and LED screen displays both the set and actual temperature values digitally to ±0.1°C.
• Locking function of set temperature values.
• Auto-diagnostic system integrated in the controller ensures rapid identification and correction if any fault does occur.
• Off-set function for calibration use. Important for ISO/Calibration requirements.
• Independent high-temperature safety protection.
• Back-up system memory protects the set point values in case of power failure.
• Quiet, long-lasting fearless and brushless induction belt-drive system.
• Digital opto-eletric feedback control ensures precise and reliable speed control.
• Electronic-controlled slow start prevents sample spillage when shaker resumes shaking after power break.
• Dual-panel heated glass door provides for full view of test samples.
• Supplied with one standard platform together with 16 units of 250ml flask clamps, one shelf and a two-meter power cord with grounded plug.
Bench-Top Cool Shaker Incubator CSI-100
|Cabinet construction||Powder-coated mild steel exterior and interior|
|Working temperature range||5°C to 60°C|
|Temperature accuracy||±0.1°C, air circulation provides optimum temperature uniformity throughout the chamber|
|Temperature setting and display||Digital, display up to to 0.1°C|
|Compressor||1/4 hp, hermetic-seal type|
|Defrost||With auto-defrost and time delay protector|
|Refrigerant||R134a, CFC free|
|Safety features||Over-temperature protection and built-in overload protection for compressor|
|Shaking speed||10-250rpm, electronic-controlled slow start|
|Shaking accuracy||±1 rpm|
|Motor||Quiet, long lasting, fearless and brushless induction motor|
|Speed indicator||Digital speedometer displays ±1rpm|
|Orbital motion||25.4mm circle/counter balance drive system|
|Door type||Dual-panel heated glass door. With switch which stops circulation fan and shaker when door is opened.|
|No of shelves supplied||1 unit|
|Shelf dimensions (mm)||550W x 450D x 10H|
|Platform dimensions (mm)||500W x 400D|
|Interior dimensions (mm)||575W x 475D x 465H|
|Exterior dimensions (mm)||680W x 750D x 895H|
|Electrical||220-240 VAC, 50Hz, 6.1A|