Medical / Pharmaceutical Refrigerators Pharma-1400

Equipment : Pharmaceutical Refrigerator, Bench-top model, Glass Door
Capacity : 1400 litres
Temperature range : 2°C to 8°C. Preset at 4°C. 
Construction : 0.7mm thickness epoxy-coated steel or stainless steel cabinet. Stainless steel control panel, base front panel, and condensate evaporation tray. Full aluminium evaporator console.
Alarm : High alarm, low alarm, A.C failure alarm
Safety feature : With built-in RCCB
Optional: Data loggers
Type tested to Electrical Safety Test Standard MS IEC60601-1: Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
Supplied with Electrical Safety Test Certificate (MS IEC60601-1)

System Features
• The control panel is equipped with a tamper-resistant touchpad and a digital temperature display to the nearest 0.1 degree Centigrade, centralizing all the operating and monitoring functions.
• The controller enables you to program the temperature settings and alarm set points quickly and easily.
• During power failure, battery back-up system supplies power to the monitor for at least 24 hours.
• The audio and visual alarms will be triggered when any of these conditions occurs : Over-temperature, under-temperature, A.C failure, battery failure, door opened for more than 2 minutes, compressor failure, or condenser overheated (clean filter).
• The alarm can be muted with the touchpad. If the fault is still not rectified, the acoustic signal is repeated automatically at every 15 minutes interval until the cabinet temperature returns to normal.
• Remote alarm contact provided for off-site monitoring.
• Non-volatile memory ensures all set values remain intact in case of power failure.
• Lock-temperature function protects against tampering of set temperatures/values.
• Off-set function for calibration use. Important for ISO/Calibration requirements.
• Self-diagnostic functions integrated into the controller ensure rapid identification and correction if a fault does occur.

• Manufactured by company with MDA Manufacturer Establishment License.
• Product registered with Medical Device Authority (MDA) – Ministry of Health.
• Manufactured by an ISO 9001 : 2015 and EN ISO 13485 : 2016 certified company.
• Hi-Low pressure switches for compressor protection and RCCB supplied as standard.
• Hi-alarm, low-alarm, AC-failure alarm, low-battery alarm, door-open and clean-filter alarms.
• Remote alarm contact supplied as standard.
• Type-tested to Electrical Safety Test standard MS IEC 60601-1 : 2006 : Medical electrical equipment – Part 1 : General requirements for basic safety and essential performance.
• Supplied with electrical safety test certificate (MS IEC 60601-1 : 2006)

Capacity1400 liters
Rust free construction• 0.7mm thickness epoxy-coated steel or stainless steel cabinet.
• Stainless steel control panel, base front panel, and condensate evaporation tray.
• Full aluminium evaporator console.
Cabinet insulationCFC-free rigid polyurethane, one-piece foam-in place insulation
Working temperature range2°C to 8°C. Preset at 4°C
Control panelTouch-pad icon-based controls and display for easy operation. Key operated power ON/OFF switch
AlarmsAudio and visual alarms with battery back-up system.
Supplied with remote alarm contact as standard. Automatic reset and ring back functions.
Alarm conditionsHigh-Alarm, Low-Alarm, A.C Failure, Low Battery, Door Open and Condenser Overheat (clean filter alarm)
Alarm set pointsPreset at 2°C for under temperature and 8°C for over temperature
Safety featuresSupplied with RCCB and high-low pressure switches as standard
RefrigerationCFC free hermetic-seal type refrigeration with automatic defrosting and condensate removal
Cooling capacity at 5°C1270W
Air circulationsBy positive forced-air fan(s) ; Two fan
Door typeDouble glass door
Self-closing, locked-in-position (90º) dual-pane heated glass door(s)
With fan switch which stops circulation fan when door is opened.
Supplied with door lock as standard
Viewing lampLED Lamp
Shelf typeFull length rid wire with polyethylene-coated finish adjustable shelves.
Optional slide out stainless steel drawer shelves.
No. of shelves supplied10 units
Shelf dimensions (mm)685W x 755D x 10H
Interior dimensions (mm)1390W x 805D x 1230H
Exterior dimensions (mm)1500W x 990D x 2060H
Weight165 kg
Power supply220-240 VAC, 50/60Hz, 5.5A
Optional item• Data Loggers
• Temperature Monitoring System
• Extra shelves