Features & Benefits
• PID controller with auto-tuning to ensure rapid heating, minimum temperature fluctuation and overshoot.
• Push-button operation and LED screen display digitally both the set and actual temperatures to ±0.1°C and can be locked.
• Auto diagnostic system integrated in the controller ensures rapid identification and correction in the event of any error.
• Off-set function for calibration use. Important for ISO/Calibration requirement.
• Back-up system memory protects the set point value in case of power failure.
• Detachable controller – can be used on any suitable size containers.
• With built-in circuit breaker to ensure safe and lasting operation.
• Stirring motor ensures temperature uniformity throughout the bath.
• Manufactured by a factory certified to ISO 9001:2015
• Type tested to MS IEC 61010-1:2006 Standard Electrical Safety Test.
Circulating water bath 830-S2
Description:
Equipment : Circulating Water Bath
Capacity : 10 litres
Temperature working range : 5°C above ambient to 100°C.
Accuracy : ±0.1°C.
Safety feature : Built-in circuit breaker
MODEL | 830-S2 | ||||||||
Bath material | Interior SUS 304 stainless steel and exterior coated mild steel | ||||||||
Temp. working range | 5°C above ambient temperature to 100°C | ||||||||
Temp. control range | 0°C to 100°C. Below ambient with external cooler | ||||||||
Controller | PID controller | ||||||||
Setting and display | Digital, read out to 0.1°C | ||||||||
Accuracy | ±0.1°C | ||||||||
Sensor | PT-100 | ||||||||
Safety device | Complete with circuit breaker as standard | ||||||||
Heater | 960 watt | ||||||||
Stirring | By means of built-in circulating pump | ||||||||
Bath capacity | 10 litres | ||||||||
Bath dimensions (mm) | 300W x 240D x 150H | ||||||||
Working area (mm) | 190W x 240D x 150H | ||||||||
Overall dimensions (tank only) (mm) | 345W x 290D x 195H | ||||||||
Weight | 6.6 kg | ||||||||
Power source | 240 VAC, 50Hz, 4A |