Features & Benefits
• PID controller with auto-tuning to ensure rapid heating, minimum temperature fluctuation and overshoot.
• Push-button operation and LED screen display digitally both the set and actual temperatures to ±0.1°C and can be locked.
• Auto diagnostic system integrated in the controller ensures rapid identification and correction in the event of any error.
• Off-set function for calibration use. Important for ISO/Calibration requirement.
• Adjustable high limit temperature cut-off ~ Protect sample from overheating.
• Low-level liquid cut-off switch protects heater burnt out.
• With inlet-outlet nozzles for internal/external temperature application.
• Safety class 3 protection.
• Back-up system memory protects the set point value in case of power failure.
• With built-in circuit breaker to ensure safe and lasting operation.
• Stirring motor ensures temperature uniformity throughout the bath.
• External circulation attachment (Model 850-S3 and 850-S5 only).
Circulating Water Bath With Safety Features 850-S2
Description:
Equipment : Circulating Water Bath with Safety
Features
Capacity : 20 litres
Temp. working range : 5°C above ambient temperature to 100°C
Accuracy : ±0.1°C
| MODEL | 850-S2 | ||||||||
| Temp. working range | 5°C above ambient temperature to 100°C | ||||||||
| Temp. control range | -40°C to 100°C. Below ambient with external cooler | ||||||||
| Controller | PID controller | ||||||||
| Setting and display | Digital, read out to 0.1°C | ||||||||
| Accuracy | ±0.1°C | ||||||||
| Sensor | PT-100 | ||||||||
| Safety features | Built-in circuit breaker, adjustable high-limit temperature cut-off, | ||||||||
| low-level liquid cut-off | low-level liquid cut-off | ||||||||
| Pump flow rate, L/min | 8 | ||||||||
| Heater | 1500 watt | ||||||||
| Stirring | By means of built-in circulating pump | ||||||||
| Bath capacity | 14 litres | ||||||||
| Bath dimensions (mm) | 300W x 240D x 200H | ||||||||
| Working area (mm) | 190W x 240D | ||||||||
| Overall dimensions(mm) | 345W x 340D x 470H | ||||||||
| Bath material | Interior SUS 304 stainless steel and exterior powder coated mild steel | ||||||||
| Weight | 3.7 kg (controller only) | ||||||||
| 6.5 kg (S1 tank) | 6.5 kg (S2 tank) | ||||||||
| Power source | 240 VAC, 50Hz, 6.4A |
